Limit switch for foam-, powder-detection and fluids
mipromex® – the security
Type MLS 1100 Limit value evaluation unit
Monitors, detects foams, powders and liquids
The secure limit value unit type MLS 1100 processes the digital measurement signal transmitted by the measurement technology. The intrinsically safe voltage supply to the measurement electronics in the connection head is provided via the signal line. A modern operating and calibration concept with automatic calculation of the measurement range allows for an extremely short commissioning of the analogue measurement. Measurement signal in percent or impulse value are displayed, as selected, on the display. As an output signal corresponds to the measurement value two relay outputs are available. The membrane keyboard with a functional and fully graphic display contributes toward the user friendliness and safe working.
Limit value product detection
Design of the mipromex® model MLS 1100
- Limit value monitoring Foam detection
- Limit value monitoring Powder detection
- Impedance measuring principle for tube and bar probes
- Easy calibration via menu-guided commissioning procedure
- Graphic display for the lab with powerful backlighting
- Menu-guided parameterisation D / F / E
- Device data and item no. saving
- Protected parameter entry
- Measurement data processing in microprocessor technology
- One measuring input for MTI probe connection
- Monitored measurement circuit from the probe to the relay
- Wire breakage protection and fault monitoring
- Fault notification display time/date
- Static or dynamic threshold value processing for foam detection
- Automatic drift compensation
- 2 relay outputs with zero potential switch contact threshold
- Threshold simulation
- RS232-/RS485 interface
- Mains 24 V AC/DC polarity-independent
- ATEX Ex design II (2) G [Ex ia] IIC/ [Exd ia]; SEV 09 ATEX 0132; CE 1254 EMV STS 024 CE
- 19" tray with aluminium-steel housing; IP 20 height 3 HE; width 12 TE
- Front plate: Height x width 128 x 61 mm / tray: Height x width x depth 100 x 60 x 160 mm
- Typ MLS 1100 IIC V1.1x 24V A/G, Article Nr. 02.32.67.02 xxxx
Grenzwertschalter mipromex MLS 1100
