Level measurement of different liquids
mipromex® – the multi-talent
Typ MLT 6130 Level evaluation unit
Monitors and regulates the level
The all-rounder MLT 6130 separation measurement unit processes the digital measurement signal transmitted by the measurement technology. The intrinsically safe voltage supply to the measurement electronics in the connection head is provided via the signal line. A modern operating and calibration concept with automatic calculation of the measurement range allows for an extremely short commissioning of the analogue measurement. Measurement signal in mA, percent or impulse value are displayed, as selected, on the display. An mA analogue signal that corresponds to the measurement value and a relay output are available as output signals. The membrane keyboard with a functional and fully graphic display contributes toward the user friendliness and safe working.
Fluid level measurement
Design of the universal mipromex® model MLT 6130
- Continuous liquid level measurements
- Impedance measuring principle for bar probes
- Easy calibration via menu-guided commissioning procedure
- Graphic display for the lab with powerful backlighting
- Menu-guided parameterisation D / F / E
- Device data and item no. saving
- Protected parameter entry
- Measurement data processing in microprocessor technology
- One measuring input for MTI probe connection
- Analogue output 4-20 mA with galvanised separation, max. strain 750 Ohm
- Monitored measurement circuit from the probe to the relay
- Wire breakage protection and fault monitoring in 4-20 mA mode
- Fault notification can be programmed on the analogue output 0.5 - 4.0 mA / 20.0 - 22.0 mA
- Fault notification display time/date
- Automatic drift compensation
- 2 relay outputs with zero potential switch contact threshold
- mA output and threshold simulation
- RS232-/RS485 interface
- Mains 24 V AC/DC polarity-independent
- ATEX Ex design II (2) G [Ex ia] IIC/ [Exd ia]; SEV 09 ATEX 0132; CE 1254 EMV STS 024 CE
- 19" tray with aluminium-steel housing; IP 20 height 3 HE; width 12 TE
- Front plate: Height x width 128 x 61 mm / tray: Height x width x depth 100 x 60 x 160 mm
- Typ MLT 6130 IIC V1.1x 24V A/G, Article Nr. 02.32.67.06 xxxx
Füllstandmessgerät mipromex MLT 6130
